Series 7000 Liquid Turbine Meter

For a wide range of accurate liquid measuring applications, ’s ® 7000 line generator metres are designed to precisely measure any type of liquid. The collection consists of a variety of dimensions, appliances, bearing structures and choices based on more than 40 years of manufacturing experience.

If you need a different model other than those listed, please contact us at info@controlssupplychain.com
Series 7101 Turbine Meter | Series 7102 Turbine Meter | Series 7103 Turbine Meter | Series 7104 Turbine Meter| Series 7108 Turbine Meter| Series 7125 Turbine Meter| Series 7145 Turbine Meter| Series 7146 Turbine Meter| Series 7183 Turbine Meter| Series 7184 Turbine Meter| Series 7185 Turbine Meter| Series 7201 Turbine Meter| Series 7202 Turbine Meter| Series 7203 Turbine Meter| Series 7246 Turbine Meter| Series 7283 Turbine Meter| Series 7284 Turbine Meter| Series 7285 Turbine Meter| Series 7286 Turbine Meter| Series 7304 Turbine Meter| Series 7306 Turbine Meter |  Series 7308 Turbine Meter| Series 7310 Turbine Meter| Series 7312 Turbine Meter

SKU: CSC77 Categories: ,

Description

SPECIFICATIONS

Series 7000 Liquid Turbine Meter

Air as the sample material determines the average k-factor for each engine. Standard screening with eight stream prices equally spread across the stream and two reproducibility levels is carried out. The linearity of the metres shows that no data point exceeds the mean of all information inputs in the linear meter capability. To ensure the precision of operation, upstream up to at least ten diameters and downstream to five diameters, the turbine meter should be mounted in a direct tube framework with the same diameter as the turbine meter. Specific flowmeters of the 7000 Series are intended for a variety of exact fluid measuring purposes. They can handle larger stream volumes and operate a flushing layout for long-lasting accuracy with reduced strain drops compared miters in their category. Its digital high frequency manufacturing is ideal for digital reader interfaces. The two-directional symmetrical structure of the 7000 series promotes inverse stream tasks without reducing the accuracy and capacity of the stream.

During the procedure, fluid moves through the diffuser part and is increased to a hydro-dynamically regulated turbine rotor with a multiple blades. The rotor speed is proportional to the volumetric flow rate. The pickup belt (on the meter installed) reads each tip of the blade when the rotor spins, generating a sine wave signal with a frequency equal to the flow rate. The turbine flowmeter is the only moving section of the rotor. The small, lightweight rotor jacks ensure quick reactions to system flow changes. In reality, the rotor is hydraulically maintained so that a mechanical thrust leveling is eliminated. The low friction structure enhances linear measurement and reduces wear and service.

WHY Controls Supply Chain

    • Over 50 years of industry knowledge
    • Fast customer service; response within 15 minutes
    • Best price quality ratio
    • We facilitate the total procurement, purchase and engineering process of our customers

 

PARTS