RMG AL-1400/AL-2300/AL-5000

The leading meters in the oil and gas sector are AL-1400/AL-2300/AL-5000 series RMG metres. It is recommended that apertures be mounted on the downstream side and next to the meter to decrease any possible losses to positive displacement meters due to a sudden opening of the valves.

If you need a different model other than those listed, please contact us at info@controlssupplychain.com.
AL-1400 l AL-2300 l AL-5000

RMG
SKU: c4fbb290e27f Category: Tag:

Description

SPECIFICATIONS

RMG AL-1400/AL-2300/AL-5000

Through slowly opening (cracking open) the block valve when pressurized, the meter should be secured against losses. Orifices and dots guard from over-speed meters. The table below shows the average diameter of the holes, which can be effectively used for different meter sizes. The exact automatic measurement tool is your gas meter. The usage is measured by extracting the prior reading from the present reading after the meter has been read. An index is considered the component of a meter indicating the volume of gas used. Two simple indices are available. Often record the lower number if your meter has circular dials and the pointer is between two numbers. The only difference is where there are 9 & 0 (zero) points. Then you read 9 because the zero is the end of a loop. Check the dial to the right if the pointer is directly on a number. If you have not reached a null dial to the right, enter the lower number for the dial to the left. To receive a reading, read the dials from right to left, input the numbers from right to left in the same order. Care in blowing drips should be practiced. Blowing drips on the side of the meter have in some cases destroyed the internal meter structures. Sudden pressure decreases because drips are blowing or the outlet valve is open too fast can lead to speeds up to an unreasonable rate through the meter, which may strain or destroy certain parts of the work.

 

WHY CONTROLS SUPPLY CHAIN

    • Over 50 years of industry knowledge
    • Fast customer service; response within 15 minutes
    • Best price quality ratio
    • We facilitate the total procurement, purchase and engineering process of our customers

PARTS