RMG 200 Gas pressure regulator
The difference between the RMG 200 intake tension and the exit pressure is used for additional power. The adjustable auxiliary load stress can be used to influence the static amplification and adjust the regulator in line mode. The voltage to be controlled at the outlet is determined at the pilot site and advised to be controlled by the pilot line. The output pressure is compared to the reference value (point spring force).
The RMG 200 controller is designed in a way that makes maintenance easy. The control unit (actuator, valve plate and valve seat) can be removed by simply removing the four screws. A single-sealed valve with six different orifice sizes can be applied to the unit; keeping into account that the maximum permissible inlet pressure varies depending on the size of the hole.