Description
SPECIFICATIONS
RMG CR4000 SERVICE REGULATOR
The CR4000 has a fully capable internal relief valve, which is fitted with wide passages to ensure rapid release of gas. The CR4000 regulator designs allow the CR4000 to be supplied with the 90-to-180-to-vent variant. It can be supplied in four separate locations as shown on page 3. The CR4000 regulator is equipped with an extra large, removable weather and bug-proof rust-proof steel screening vent, to survive freezes on an outlet press setting. The CR4000 regulators are designed with the CR4000 regulator. If not, a 3/4-inch NPT plastic may be flashing into the air at 90° wind elbow (part 78041P025) with separate panel (part 70400P017). The safety finish on the regulator CR4000 is more powerful than anything else in the industry to avoid corrosive effects from the atmosphere and harsh conditions. In and out of each precise die mounted aluminum controller, a special conversion coating is processed that is part of a unique 7-step finishing procedure. This special film significantly avoids metal surface oxidation. It also stops cracking and blistering of finished paint. A single polyester base supplemented by a high-solid polyurethane topcoat provides the all external regulator surfaces with long-lasting protection. The conversion coating method of the American Meter follows all environmental requirements.
WHY CONTROLS SUPPLY CHAIN
- • Over 50 years of industry knowledge
- • Fast customer service; response within 15 minutes
- • Best price quality ratio
- • We facilitate the total procurement, purchase and engineering process of our customers
PARTS
